EdgeRouterPro-8 DN42 config example with v1.9.0

After a lot of searching and trying I [Phil/ALS7] finnaly got a working config

##Features

• IPv4/IPv6 Tunnel via OpenVPN
• dn42 DNS

##How-To

–> still work in Progress

1) you need to create all required fields in the registry –> look at howto/Getting startet page

The data i used are the following:

Own ASN: AS111111
Own IPv4: 172.AA.AA.64/27
Own IPv6: fdBB:BBBB:CCCC::/48

Peer ASN: AS222222 Peer Remote Address: X.X.X.X
Peer Remote Host: X.X.X.Y Peer Port: 1194

2) get a peer –> ask nice @irc

3) You need following data from the peer

–tunnel options, secret key –ASN from the peer –ip's

…

###Create IPv4 OpenVPM Interface

start a ssh session to your router

copy vpn key to /config/auth/giveITaName – Create folder if needed

configure set interface openssh vtun0
set interfaces openvpn vtun0 mode site-to-site
set interfaces openvpn vtun0 local-port 1194
set interfaces openvpn vtun0 remote-port 1194
set interfaces openvpn vtun0 local-address 172.AA.AA.64
set interfaces openvpn vtun0 remote-address X.X.X.X set interfaces openvpn vtun0 remote-host X.X.X.Y
set interfaces openvpn vtun0 shared-secret-key-file /config/auth/giveITaName

set interfaces openvpn vtun0 openvpn-option "–comp-lzo" //if your peer support compression
commit
save
exit

Now the ipv4 tunnel should be up&running

Check it with:

show interfaces openvpn
show interfaces openvpn detail
show openvpn status site-to-site

Create IPv4 BGP Session

configure